Wednesday, 8th February 2012.
China buzzer Manufacturers & Suppliers | Subscribe

Posted on 18-05-2009 by microbuzzer

Piezoelectric buzzer as the audio signal generator has a wide range of uses, low power consumption as they are, sound clarity and penetration. External buzzer drive circuit or drive circuit requirements of oscillation in the resonant frequency of piezoelectric components. Piezoelectric element at its resonant frequency to provide the maximum output sound pressure. However, a [...]

Tags: , , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 18-05-2009 by microbuzzer

This is used in the lift button on a circuit through the hardware circuit to achieve the buzzer background about the driver as follows:
1. Due to the limited space available in the circuit can only choose SMD passive buzzer  (original height-saving considerations, the high active), which implies the need for oscillation circuit, he can work.
2. [...]

Tags: , , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 18-05-2009 by microbuzzer

Piezoelectric film is the buzz of high pressure after extreme pressure of the piezoelectric ceramic adhesive film on the vibration of sheet metal. When Add AC voltage, it will because the piezoelectric effect, and the generation of mechanical deformation of stretching and shrinkage of the use of This allows the issue of sheet metal vibration [...]

Tags: , , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 17-05-2009 by microbuzzer

Electromagnetic buzzer internal composition:
1. Waterproof sticker 2. Spools 3. Coil 4. Magnet 5. Base 6. Pin 7. Shell 8. Core 9. Sealing glue 10. A small metal plates 11. Vibrating membrane
12. Circuit board
The working principle of passive electromagnetic buzzer:
Ac signal through the bypass line in the stent in the stent core package produce a column [...]

Tags: , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 17-05-2009 by microbuzzer

Conventional electromagnetic buzzer passive component products

Serial number

  
1

  
2

  
3

  
4

  
5

  
6

  
7

  
Name

  Stent
Line package
  Magnetic ring
Plastic Block
  Printed Circuit Board
  Mo film
  Shell

 (1) Preparation of electro-magnet M: about 6 cm in the bolts on the iron ring around the wire 100, line 5 cm for left-side lead, using transparent adhesive tape to stick a good coil, so as not to release the coil, and then [...]

Tags: ,
Posted in TECHNOLOGY | Comments (0)

Posted on 15-05-2009 by microbuzzer

Passive electromagnetic and piezoelectric buzzer  to install passive
Buzz passive electromagnetic inductive load devices are the ideal square wave input is usually recorded as being: VO-P.
Buzz passive pressure load is capacitive devices, the ideal square wave input is usually recorded as two-way: VP-P.
However, if the IC is the reverse, such as device 4049, from a non-door [...]

Tags: , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 15-05-2009 by microbuzzer

Electromagnetic buzzer internal composition:
1. Waterproof sticker 2. Spools 3. Coil 4. Magnet 5. Base 6. Pin 7. Shell 8. Core 9. Sealing glue 10. A small metal plates 11. Vibrating membrane
12. Circuit board
The working principle of passive electromagnetic buzzer:
Ac signal through the bypass line in the stent in the stent core package produce a column [...]

Tags: , ,
Posted in TECHNOLOGY | Comments (0)

Posted on 15-05-2009 by microbuzzer

Buzzer variety of types of specifications, order skills required to be aware of several parameters:
Voltage, current, drive, size, connection / fixed the way, of course, more importantly, want to be the voice of (the size of the sound pressure, frequency of high and low),
Operating voltage: electromagnetic buzzer-style, from 1.5 to 24V
Piezoelectric buzzer from 3V to [...]

Tags: ,
Posted in TECHNOLOGY | Comments (2)

Posted on 15-05-2009 by microbuzzer

The most common market, there are four kinds of the buzzer:
1 kinds of sub-section shape is the encapsulation of soft start (to start bonding), this buzzer cheaper (about 0.30 yuan market around this price is for reference only); this type of non-performance of buzzer stability, the more obvious environmental impacts, such as vibration during [...]

Tags: ,
Posted in TECHNOLOGY | Comments (0)

Posted on 29-12-2008 by microbuzzer

Electrical equipment rated current is defined as the baseline ambient temperature in the working conditions of rated voltage, the heat does not exceed the long-term temperature by allowing heat to allow the greatest long-term through the current. Ambient temperature for long-term allows the maximum current has a great impact , as the equipment installation location [...]

Tags:
Posted in TECHNOLOGY | Comments (0)

CONTACT US SAMPLES TECHNOLOGY SPEAKER BUZZER HOME